Level 2 NVQ Diploma in Construction and Civil Engineering Operations (Construction)​

Including:  Level 1 Award in Health and Safety in a Construction Environment.​

Can only be completed as stated below.

Level 1 Award in Health and Safety in a Construction Environment.​​​

​

• This RQF Level 1 Award in Health and Safety in a Construction Environment is delivered in full compliance with the regulated requirements and guidance set by the construction industry working group and the Standards Setting Body, CITB.

• This qualification plays a vital role in preparing candidates for safe and effective participation in the construction sector. As such, it is essential that its delivery reflects the standards and expectations agreed upon by industry stakeholders.

• Despite some providers stating this can be completed in one day, the total duration of the qualification is 29 hours, comprising: • 21 Guided Learning Hours (GLH) – defined by Ofqual as time spent being taught or instructed by a qualified individual under direct supervision.

• 8 hours of additional personal learning time. • Guided Learning Hours must not be reduced through APL (Accreditation of Prior Learning) or RPL (Recognition of Prior Learning).​

• It is mandatory to have a current in date HS&E test record that is no older that 2 Years.

• Prior to registration full payment must be made and cleared,

• Clicking on the "request an invoice" tab.

• Prior to starting this qualification an invoice will be raised for £234.00 inc VAT where applicable, this will book a position for the next group.​

• On completion of this qualification and following full payment of this service you will receive:

• Full Level 1 Certificate of achievement, CSCS Labourers card.

​

​​​

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 1 ​​​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 4: Laying modular pavement in the workplace

• Unit 5: Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Unit 6: Setting out secondary dimensional work control in the workplace

 

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 2 ​​​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 4: Laying preformed kerbs and channels in the workplace

• Unit 5: Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Unit 6: Setting out secondary dimensional work control in the workplace

 

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 3 ​​​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 4: Installing, maintaining and removing temporary excavation support in the workplace

• Unit 5: Setting out secondary dimensional work control in the workplace

• Unit 6: Installing drainage in the workplace

​​​​

 

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 4 ​​​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Placing and compacting concrete in the workplace

• Unit 4: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 5: Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Optional Unit 1: Preparing, mixing and distributing concrete and mortars in the workplace

• Optional Unit 2: Reinstating ground condition in the workplace

• Optional Unit 3: Cutting, drilling and shaping construction related materials in the workplace

• Optional Unit: 4 Laying, placing or applying construction related materials in the workplace

• Optional Unit: 5 Preparing and mixing construction related materials in the workplace

• Optional Unit: 6 Installing, maintaining and removing temporary excavation support in the workplace

• Optional Unit: Identifying and marking the location of utilities apparatus and sub-structures in the workplace

• Optional Unit: 7 Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace

• Optional Unit: 8 Preparing and operating ride-on rollers to compact materials in the workplace

• Optional Unit: 9 Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Optional Unit: 10 Moving, handling and storing resources in the workplace

• Optional Unit: 11 Controlling, directing and guiding the operation of plant or machinery in the workplace

• Optional Unit: 12 Installing, constructing, maintaining, dismantling and removing temporary works in the workplace

• Optional Unit: 13 Locating and excavating to expose buried utility services in the workplace

• Only one optional unit required.

 

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 5 ​​​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Placing and finishing concrete in the workplace

• Unit 4: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 5: Erecting and striking proprietary formwork in the workplace

• Optional Unit 1: Preparing, mixing and distributing concrete and mortars in the workplace

• Optional Unit 2: Reinstating ground condition in the workplace

• Optional Unit 3: Placing and compacting concrete in the workplace

• Optional Unit: 4 Erecting and dismantling access/working platforms in the workplace

• Optional Unit: 5 Cutting, drilling and shaping construction related materials in the workplace

• Optional Unit: 6 Laying, placing or applying construction related materials in the workplace

• Optional Unit:  Preparing and mixing construction related materials in the workplace

• Optional Unit: 7 Installing, maintaining and removing temporary excavation support in the workplace

• Optional Unit: 8 Identifying and marking the location of utilities apparatus and sub-structures in the workplace

• Optional Unit: 9 Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace

• Optional Unit: 10 Preparing and operating ride-on rollers to compact materials in the workplace

• Optional Unit: 11 Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Optional Unit: 12 Moving, handling and storing resources in the workplace

• Optional Unit: 13 Controlling, directing and guiding the operation of plant or machinery in the workplace

• Optional Unit: 14 Installing, constructing, maintaining, dismantling and removing temporary works in the workplace

• Optional Unit: 15 Locating and excavating to expose buried utility services in the workplace

• Only one optional unit required.

 

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 6 ​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Moving, handling and storing resources in the workplace

• Unit 4: Installing, maintaining and removing work area protection and safety equipment in the workplace

• One optional unit required from this group

• Optional Unit 1: Placing and compacting concrete in the workplace

• Optional Unit 2: Installing drainage in the workplace

• One optional unit required from the next group

• Optional Unit 1: Preparing, mixing and distributing concrete and mortars in the workplace

• Optional Unit: 2 Reinstating ground condition in the workplace

• Optional Unit: 3 Erecting and dismantling access/working platforms in the workplace

• Optional Unit: 4 Cutting, drilling and shaping construction related materials in the workplace

• Optional Unit: 5 Laying, placing or applying construction related materials in the workplace

• Optional Unit: 6 Preparing and mixing construction related materials in the workplace

• Optional Unit: 7 Installing, maintaining and removing temporary excavation support in the workplace

• Optional Unit: 8 Identifying and marking the location of utilities apparatus and sub-structures in the workplace

• Optional Unit: 9 Preparing and operating forward tipping dumpers to receive, transport and discharge materials in the workplace

• Optional Unit: 10 Preparing and operating ride-on rollers to compact materials in the workplace

• Optional Unit: 11 Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Optional Unit: 12 Controlling, directing and guiding the operation of plant or machinery in the workplace

• Optional Unit: 13 Installing, constructing, maintaining, dismantling and removing temporary works in the workplace

• Optional Unit: 14 Locating and excavating to expose buried utility services in the workplace

 

​

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 7 ​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Plus one optional unit required from this group

• Optional Unit 1: Placing and finishing concrete in the workplace

• Optional Unit 2: Installing drainage in the workplace

 

​

 

This Qualification can be completed within 4 - 6 Weeks using an Online Portfolio without any classroom work. ​

Pathway 8 ​​​​​Cost inclusive of VAT & CSCS Card £655.00 

​​

​

• Unit 1: Conforming to general health, safety and welfare in the workplace

• Unit 2: Conforming to productive working practices in the workplace

• Unit 3: Reinstating ground condition in the workplace

• Unit 4: Installing, maintaining and removing work area protection and safety equipment in the workplace

• Unit 5: Forming and finishing excavations manually in the workplace

• Plus one optional unit required from this group

• Optional Unit 1: Identifying and marking the location of utilities apparatus and sub-structures in the workplace

• Optional Unit 2: Preparing and operating powered units, tools or pedestrian plant, machinery or equipment in the workplace

• Optional Unit 3: Controlling, directing and guiding the operation of plant or machinery in the workplace

• Optional Unit 4: Locating and excavating to expose buried utility services in the workplace

​​​​​​

 ​